CURB APPEAL IN WINTER
How To Strip A Wire Safely With Wire Cutters And DIY Tools
As a DIY enthusiast, you should know how to strip a wire. If you’ve never used a wire stripping tool, it’s time to change that. You never know what your next DIY electrical project might be. When you need new wires, it would be better and cheaper if you could handle the task yourself. There…
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
Here are the Top 5 most accurate wire stripping tools on the market today.
Each tool is available on Amazon.
For a wire stripping tool, this is the most affordable option. With a retail price of under , you’ll be hard-pressed to find a better deal. They have about 20 different stripping and cutting options and feature an ergonomic design. It also includes blade scores.
Pros:
How To Use Wire Strippers
When stripping wires, you’ll need to find the correct slot. The slot should let the insulated wire fit snugly but not so much because you don’t want to remove the insulation. Wire without insulation might be a little dangerous if you’re new at this.
Cons:
Standard Wire Size
Another easy technique would be to use wire nuts. Wire nuts are plastic nuts that can secure wires that have been twisted together.
Strip The Wire
Cons:
A slot is known as a gauge and can be used on any wire strippers. When using a different tool there won’t be a gauge, so you have to be careful. As long as you’re not in a too-small slot, you should be fine with wire strippers.
How To Strip Stranded Wire
What we’re talking about here are the colored wires. They are insulated with copper wire in a thread-like manner. This helps with preserving your wires.
Top 5 Most Accurate Wire Stripping Tools
Stripping coaxial cable is different than stripper other cables. There are multiple layers to coax. The outer layer is the outer insulator. Underneath is a silver shielding and metal conductor. After that, you can find the second insulator.
Pros:
Best Price: IRWIN VISE-GRIP Wire Stripping Tool / Wire Cutter
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
- Built in screw cutters
- Great price
- Strips-on-command
- Easy to hold
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
- Easy to hold
- Durable
- Easy to read markings
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
- Firm handle
- Hot-riveted joint
- Higher gripping power
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
- Self-adjusting jaws
- Suitable for stripping any wire
- Stripping diameter automatically adjusted
The post How To Strip A Wire Safely With Wire Cutters And DIY Tools appeared first on Homedit.
- Durable
- Easy to hold
A plastic-sheathed cable has multiple smaller cables inside. It contains three electrical wires inside of the sheathing. To access them, you need to strip the plastic sheathing with wire strippers. Then, you can start stripping the smaller internal cables.
- Difficult to cut with
- Low cutting power
DIY Wire Strippers
For bigger jobs, an automatic wire stripper is the most useful option. The stripper retails for under . So if you prefer an automatic standard cutter, check this tool out. It has a sharp blade and can work through plastic insulation. It’s also good for when you’re working with crimp terminals or fixing a scored line and wire gauge.
Who doesn’t have a pair at home? All you do is clamp down to cut the wire at the desired length, and then squeeze and twist. It’s better if they’re sharp so you don’t squeeze too hard and damage the wire.
Scissors
You only need one tool when stripping wire. The tools are not expensive, and they’re long-lasting. Unless you do a lot of wire stripping, you only need to buy one wire stripper during your lifetime. And if you use a sharp pocket knife, avoid cutting live wires.
Utility Knife
If you want a standard wire cutter, then go with Klein. This model can work with any wire including nicked wires. If you’re a newcomer, you’ll find this tool is easy to use.
A wire stripper machine is more expensive, but if you’re working with a lot of wires, it will save you time. You can buy one for that is quite decent or invest in a nice one for 0 or more.
Lineman’s Pliers
Using a utility knife is a simple way to remove insulation from wires to strip them. You cut the insulation at the desired length and start pulling it off. The reason you use a utility knife instead of a kitchen knife is that you’ll have more control.
Sandpaper Helper
When rewiring and you need to strip the ends of the wires, the best way to put the insulation back on the wires is with electrical tape.
Stripping Machine
An underground table is more difficult to strip. It is well, and tightly, insulated. This type of cable can’t be stripped with wire strippers initially. You will need to use a utility knife to skim the edge of the insulation. Then you can start accessing the smaller cables that the outer layer was protecting.
Strip Wire Second Insulation
You also don’t want to cut through the insulation. If you have plastic sheathing around the wire and you don’t have wire strippers, you could melt it off with a heat source, but this method will require a steady hand, and only you would know if you’re qualified for that task.
Cons:
Electrical Tape
To use electrical tape, simply wrap the tape around the exposed wire while it’s not hot. Wrap it like you’re wrapping it with medical tape. Make sure that you overlap the exposed wire underneath at least half an inch on both sides.
This compact, lightweight wire stripper and cutter with wire gauge cuts solid and stranded wire and copper wire. If you’re looking for a middle-ground wire stripper then you should consider this one.
Wire Nuts
When working with durable electrical connections begin with shutting your power off. What you want to do is take the entire piece of insulation off instead of the very tip. You can strip one side and the other, but there is another way. Use a utility knife to score the insulation lengthwise. Then, you can peel away the outer sheath and remove the wire from the insulation.
Electrical Wires
Last on this list is from Klein. When you want to strip electrical wire, this is considered the go-to standard wire cutter. It can handle most electrical wire tasks. If you want to remove plastic insulation or you’re working with a wire gauge, this tool can help you.
Electrical
Electrical work should be taken seriously, as accidents can easily occur. Before you begin, make sure you have a reliable wire strip tool.
Plastic Sheathing
Pros:
Underground
A DIY electrical project that involves a wire will require experience, first and foremost. If you’re inexperienced, and you try to complete a project with a sharp knife, then you won’t achieve the results you desire. After you acquire more experience, you can try other tools to strip wire. You can even strip wire with scissors, but again, wait until you acquire more experience.
Coaxial Cable
It takes about 50 feet of 12 gauge wire to make one pound.
Frequently Asked Questions (FAQ)FAQ
What Speaker Wire Is The Positive One With The Stripe?
The best way to remove plastic off of copper wire is to melt it off with a controlled heat source.
How Much Copper Wire Does It Take To Make A Pound?
If you don’t have wire strippers, then a sharp knife will get the job done. Make sure you place the wire on a flat surface. Slowly cut through the insulation without slicing the copper wire.
What Is The Best Way To Remove Plastic From Copper Wire?
As a DIY enthusiast, you should know how to strip a wire. If you’ve never used a wire stripping tool, it’s time to change that. You never know what your next DIY electrical project might be. When you need new wires, it would be better and cheaper if you could handle the task yourself.
What Can I Use To Strip Wire If I Don’t Have Wire Strippers?
Cons:
What Is The Highest Paying Scrap Metal?
There are other tools you can use when you want to strip electrical wire. You don’t need a standard wire cutter or powerful stripper’s jaws, although they would help. If you’re a DIY enthusiast you’ll like the following suggestions.
Strip A Wire Conclusion
The second insulator is small but thick like plastic. After you cut through that, you will find the inner copper wire.
When you strip wires with this method, it’s common to strip a quarter to three-quarters of an inch off the end. This way, you can rewire while retaining more wire that can be insulated.
After you’re confident with the slot, clamp down and twist. This will cut the outer insulation. After it is loose, you pull up to slide the insulation off of the wire. This works in small areas and for stripping large areas.
For most of these methods, you can use sandpaper to give you a better grip and pull the insulation off of the wire after you cut it. If it’s too hard to pull, then stop and evaluate because it might be tearing the wire.
Pros:
