Paver Patterns: DIY Ideas For Your Outdoor Living Space

A running bond is one of the most popular paver bonds. It consists of alternating the placement of the pavers with each row ending in the center of the last. It starts with a full paver then a half paver.
Non-tumbled pavers only require regular joint sand. They look more modern, have a beveled edge, and don’t look as rustic. This type of paver is common and the texture is easy to find. 
Tumbled pavers pass through a tumbler used to mix cement. The pavers are filled in a rubber-coated barrel with grit and water. Next, the barrel is turned for several weeks which adds texture to the new pavers.
This is a common type of bond that requires two different colors. Most people understand what the checkerboard pattern is and how to use it. You just alternate the colors of pavers.

Paver Laying Patterns

In this case, we are referring to the sandy color. It is similar to cream. Both are warm yet light and can take the gray look away from the usual patio setting. The pavers are easy to find because they’re manufactured regionally.
Do not lay long linear paver lines. You should use one of the common patterns from above. To prevent long linear lines, never have four corners meet anywhere throughout your paver pattern. Also, you don’t want your joints to run in a linear pattern for more than nine feet.
Terracotta is a reddish-brown color based on fire-treated clay. It is used to create statues, pots, and tiles all over the world. The word and the technique it describes are old, having been used for hundreds if not thousands of years.

Different Textures

To prevent pavers from becoming slippery, spread a light layer of sand over their surface. The sand will improve traction and the pavers won’t be as slippery. You should also use sand to fill in the areas between the pavers. 
Sand, or sandstone, is a warm paver color. The color creates a beach feel but is also good if you want a desert landscape look. Sandstone pavers can be a color or type of paver.

Non-Tumbled Paving Stones

When dirt is compacted, it shrinks by 30 percent. What this means is if your dirt backfill is 10 inches, for example, the pavers will settle by three inches. To prevent settling, lay a gravel base over your dirt. Once your gravel base is complete, spread concrete sand over the gravel. 
To help you avoid spending more time and money than necessary, we thought we’d share the three most common mistakes people make when installing pavers

Tumbled Paving Stones

A paver bond is like a brick bond. A brick bond is a type of bricklaying pattern. You can create unique designs in the bricks by alternating their layout or their colors. Paver stones are either laid in a bond or running bond pattern.
The basketweave pattern isn’t as complicated as it looks either. All you have to do is use two pavers one way and the next two the other way. This is the simple basketweave pattern. 

Embossed

Flagstone is a common choice for pavers. They are easy to find and can often be harvested from your land. They offer a great balance of natural and man-made options.

Slate

The paver color matters almost as much as the laying pattern and texture. There aren’t many paver colors but they can be painted to look bright and bold. 
Paving stones are not one size and are cut differently. Their texture affects the surface. Although some paver stones are smooth and others are natural, for a paver patio, you can mix and match if you want something different.

Flagstone

More often than not, when you do find white pavers, they aren’t white. They are more like a light gray. You can try staining, whitewashing, or better yet, limewashing the pavers for a whiter look. 
Pavers will become loose after a few years. When this happens, loose pavers will cause tripping accidents. Loose pavers should be adjusted immediately. 

Cobblestone

Slate pavers are made of slate. They are thin, grey, and smooth in texture. Slate refers to both color and material. If the pavers are slate and concrete, they’re made of concrete but have a slate color or resemble slate. The material is a type of rock often used for hardscaping.
Buff is a yellow-brownish color that is actually quite common in stone. It’s the natural color of many stones, leathers, and trees. Because it is so often found in nature, it looks natural on any patio.

Paver Colors

White patio pavers are rare as white isn’t often found in stones. You will need special pavers to have a white patio. And because white pavers are rare, they’re  expensive. 
If you can’t decide on a color then grey is probably a good choice. Add an accent color for best results as all grey can be a little daunting and won’t have enough personality for most patios. But you can always give it a try and paint it later.

Sand

When compacting a gravel base, use a steel tamper or plate compactor. To achieve the desired thickness, compact the base two inches at a time.  For small projects, a steel tamper is best. For patio projects or bigger jobs, a gas plate compactor will be necessary. 

Grey

Travertine is a calcium carbonate extracted from hot springs in Turkey. The material is a member of the limestone family. Travertine has tiny little pitted holes that are created by gas bubbles. The three most popular travertine colors are gold, walnut, and ivory.
Your outdoor space is just as important as your indoor space however, outdoor projects allow you to draw more attention to your home. 

White

Buff is a common paver color for patios so you won’t have trouble finding it. Or at least something very similar. There are many different tones and shades of buff and it is quite versatile too.
Non-tumbled pavers are smooth but they aren’t slick. This paver style does not go through additional manufacturing like other pavers. Because they aren’t tumbled, they are cheaper than tumbled pavers. 

Black

The herringbone pattern is more complicated than it looks. The only really hard part is starting it and ending it. Otherwise, it’s a “W” pattern stacked on top of each other. The base is four pieces and that continues on. 

Buff

Black pavers are also rare. They will need to special order them as suppliers usually make them. Most black pavers are made from asphalt or recycled rubber. That’s the easiest way to get black pavers because it is important that the pavers not simply be dark gray. 

Terracotta

They are small and made of stone, yet shaped like bricks. Each stone has a bumpy texture, and when finished, the tops will be textured and are often rounded. 
Cobblestone pavers are rough and grey. They are inspired by the classic cobblestone streets of Europe. But today, they are used for different reasons.

Paver Pattern Styles

An ashlar pattern is takes practice to perfect. It requires four different paver sizes instead of just one size. Once you perfect it, you’ll have a impressive paver patio.
Learning about laying patterns can help you decide which paver pattern is best for your outdoor space.  

Runner Paver Laying Pattern

Among backyard design ideas, a new paver patio is a DIY project that will add value to your home. You can choose different laying patterns with different textures to mix things up. Fortunately, with paving stones, you don’t have to use one size, which offers more room for creativity. 

Travertine Paver Laying Pattern

Among all design ideas, the strongest brick pattern is herringbone. The brick style can be laid at a 45 or 90 degree angle. The pattern offers multiple angles that will impress visitors, neighbors, and potential homebuyers.  

Checkerboard Paver Laying Pattern

A gravel base is the most important step for a paver project. The gravel base must be flat and firm. To achieve this, compact the base and your pavers. If you forget to compact the base, you’ll end up with sunken or raised pavers.

Herringbone Paver Patterns

Ashlar Paver Patterns

Stamped pavers are made from concrete which makes them cheaper than stone pavers. They mimic stone but can also be embossed with tile-like patterns like flowers or stars. Embossed pavers are cheaper, so if you want to reduce the costs of your paver patio project, for example, this would be one option.  

European Fan Paver Patterns

Flagstone pavers come in natural colors. However, the term describes a pattern rather than a material. The flagstone texture is seen as oddly-shaped rocks that create a running bond paver pattern similar to a puzzle. 

Basketweave Paver Patterns

Before you choose a paver pattern there are a few things to consider. The texture, color, and bond pattern of your paver stones should complement one another.

Pinwheel Paver Patterns

The fun thing about installing paver stones is that there are plenty of paving patterns and design ideas to choose from. When installing paver stones, you want to preserve your perfect paver pattern, so make sure not to cut corners during installation. A paver project, like a new paver patio, is a great DIY home improvement endeavor.

Custom Paver Patterns

Although installing pavers is an erstwhile DIY home project, if you don’t know what you’re doing you will make costly mistakes.

Curved Walkway Paver Patterns

Paver patterns are fun to create. As a DIY project, a paver patio can draw attention to your outdoor living space. Although paver projects aren’t easy, it doesn’t mean they’re hard. Depending on the laying pattern you want, you may or may not need a contractor. 
The European fan pattern is also difficult to master. It creates a fishtail pattern by creating fans that stack on top of each other. It looks extremely impressive and unique if you can pull it off using small square pavers. 

Top 3 Paver Installation Mistakes

Tumbled pavers look rough and natural in texture but they’re less natural than non-tumbled pavers because they require an extra step. This extra step is called tumbling.
The pinwheel pattern is also common. You use one small square paver and then place four rectangle around it. The result looks like pinwheels scattered over your patio. 
The most common backfill is dirt. What many do not realize is that dirt backfills sink, rotate, and separate. When this happens, you’ll end up with an uneven surface.

Dirt Backfilling

The post Paver Patterns: DIY Ideas For Your Outdoor Living Space appeared first on Homedit.
Here are a few options:

Long Pavers

This is the best paver patio paver pattern out there. All you have to do is draw out your pattern, then make sure all the measurements will work. Buy the pavers that you need for the job and create your masterpiece. 

Base Compact

A laying pattern for a curved walkway is more labor intensive than other paver options. The pavers are installed at right angles to one another. With each curved edge, you will need to cut them into the outside pavers which will allow you to curve the walkway.
A paver patio isn’t the only project that would add curb appeal to your home. Walkways and footpaths are also great ideas. A curved walkway paver pattern with concrete would  add curb appeal to your home.

Paver Patterns Conclusion

Pavers cost, on average, per square foot. A 400 square foot patio will cost roughly ,200. When you make your own pavers, you’ll save 50 percent or more on your paver project.  
Grey pavers might be the most common. They can be found in any shape and with any texture. Grey pavers are the base for embossed paver stones because they are made of concrete instead of real stone.
However, laying patterns will be the face of your project, whether a paver patio or walkway, so it’s the most important. 
After you’ve installed a paver pattern, apply a paver sealer to waterproof the surface. UV rays, direct sunlight, snow, and rain will damage your paver surfaces.