How To Hide TV Wires and Improve the Look of Your Living Room

With the help of periodically placed openings or connectors that allow the wires to turn corners or change direction, the cables and cords can be run to the exact place they’re needed while being kept tidy and concealed.

Why Hide Your TV Wires?

If you paint the box the same color as the wall it will be placed against, it will all but disappear into the décor.
Pros

Organization

Pros
This low-profile kit is easy to install and fits multiple cables, so all your AV wires stay organized and hidden.
There is an abundance of options when it comes to cable and cord hiding solutions and, in this article, we’ll look at some of those options. We’ll determine the reasons for hiding cables and some of the best wire management solutions out there, and we’ll even look at some cool DIY solutions to this common problem. So, keep reading and let’s get those cables organized!

Aesthetics

The Eveo Cable Concealer Cable Management Kit keeps all your unsightly cables and cords concealed and out of the way of children, pets, and furniture. This on-wall raceway system hides up to 300 inches of cable in housing that is one-inch wide, 1/6” high and remarkably easy to install.

Safety

Best Products to Help Hide Your TV Wires

Echogear in Wall Cable Management Kit

I think most in-wall kits would install in the same way, but always be sure to reference the manufacturer’s instructions before installing any kit.

The kit includes two metal electrical outlet boxes, one recessed cable plate with straight blade inlet, one recessed cable plate with power source connection, one 6” grounded extension cord, one roll of electrical building wire, and three wire nuts.
Make sure to place the fixture in a location that will be hidden by the TV. Once you’ve determined where that will be, take the template from the kit and draw a line around it on the wall.

How to Install a TV Cord Hiding Kit

Twenty adhesive-backed channels, twenty drywall anchors and screws, three L-connectors, three T-connectors, three inside corners, three outside corners, twelve straight connectors, and instructions.
Feed the electrical building wire through the wall from the top hole, down to the bottom. Make sure that there are a few inches of cable sticking out of both holes. Create a “hook” at the top end of the wire that will catch on the wall and prevent the cable from falling into the wall.
Feed the additional AV cables through the access portion of the plate. Once the electrical cable is fastened and the AV cables are though, place the receptacle face plate into the wall and secure with the provided screws.
PowerBridge ONE-CK Recessed In-Wall Cable Management System is designed to conceal low voltage cables and wires for wall mounted TVs behind the wall, providing a clean look in your entertainment area. The single-gang unit works with all TVs and wall mounts and installs easily. Simply connect the pre-wired PowerConnectors and you’ll have instant power directly behind your wall hung tv.
Cons
Plug the female end of the included extension cord into the strike plate inlet and the male end into an existing electrical outlet or power bar.
There are a number of options when it comes to wire binding, casings, and raceways to conceal your electrical cables and wires and all of them are pretty simple to use. Essentially, the cables and wires are “bundled” together and wrapped in the binding material or placed in a casing or raceway.
The kit requires three inches of space within the wall cavity and ½” to 1” drywall for proper installation. Included in the kit is power and low voltage cable management, a hole saw drill attachment for correct grommet hole size, locking bracket wings for secure installation, two pre-wired grommets, and one 6’ extension cable.

How to Install a TV Cord Hiding Kit into a Wall

There are really two ways you can utilize “books” to hide your cables and wires from view. The first is simple. If you have a wall mounted TV with an entertainment table or credenza below, simply stack a pile of books in a pleasing arrangement and place them in front of the cords that come down from the TV. This hides the cords from view and allows you to display your favorite books or décor at the same time.

Step One

The Datacomm 50-3323-Wh-Cable Organizer Kit is an in-wall cable hiding system that allows you to hide your AV equipment cables in the wall, where they’re out of sight and safely out of reach of children and pets. It is code compliant and does not connect to existing electrical wiring, meaning there is never contact with live electrical circuits.
With the included connectors, you can have a straight run of cable and fit any corner with t-intersections, inside and outside corners, and outside elbows. The sixteen-inch-long raceways can also be cut down to suit whatever length you need. For installation you can choose between two-sided tape or drywall anchors and screws, which ever way you prefer. Once attached to the wall, the wire cap simply slides into place to conceal all the wires within.
If your wall-mounted TV is already in place, you will have to take it down to install the kit but leave the bracket up. Once the TV is out of the way, figure out where the best place would be for the top fixture of the kit to go. This can go above, below, or on either side of the TV mounting bracket.

Step Two

Cons

Step Three

The Delamu Cord Cover Raceway Kit allows you to hide ugly cords and cables from sight and away from children and pets. With ten cuttable cable management raceways and a host of different connectors, you can run your wiring in what ever direction and what ever length you need. The paintable system is easy to install with double sided adhesive or screws and anchors and accommodates up to 157-inches of cable.

Step Four

Now is the ideal time to install additional AV wires and cables. Starting at the top, feed your additional cables through the cable access hole and down the wall the same way you did with the electrical cable. Pull the end of the AV cables out of the bottom hole being careful not to pull them all the way through the top access hole.

Step Five

Pros

Step Six

The D-Line Cable Raceway is a one-piece, easy to install, cable management system that allows you to keep cables and wires out of sight and out of reach of children or pets. The simple half-round design hides beautifully over baseboard or seamlessly on any wall.
Cons

Step Seven

The Echogear In-Wall DIY Cable Management Kit allows you to safely run electrical cables and wires behind the wall so they’re out of sight and pose no possible danger to children or pets. This pre-wired system is power-ready and easy to install in just thirty minutes or less. It is also ETL In-Wall Certified so you can res assured your home is safe.

Step Eight

Cons
Install the bottom fixture – the recessed cable plate with straight blade inlet. Follow the manufacturer’s instructions to connect the cable wires to the receptacle screwing them together with the included wire nuts.

Step Nine

Examples of these types of wire management are baseboard channels, cord covers, cable raceways, wrap around braided sleeves, flexible wire conduit, and fabric cord concealers.

Step Ten

Another relatively inexpensive option is to hide your cables and wires with a panel board. Panel boards come in various sizes, colors, and designs, and are easy to make if you want one completely customized to your décor. The cables and wires for the TV and other devices run up the back of the panel board between the board and the wall. Usually there is a groove cut into the back of the board so that the cables can recess, and the board can fit flush on the wall. The TV is them mounted to the wall through the panel and all the wires are concealed.
Next, you’ll install the top fixture – the recessed cable plate with power receptacle. Following the manufacturer’s instructions connect the appropriate conductor to its corresponding grounding screw on the back of the receptacle. Screw each in place.

Clever Tips to Hide Your Electrical Wires at Home

You are now ready to install or re-install your wall-mounted TV.

Binding Them with A Casing or Plastic Ribbon

Cons
Feed the top end of the electrical cable through one of the included metal electrical boxes, leaving about six inches of cord exposed in the box. Insert the electrical box on one side of the top hole and fasten with the provided screws. Repeat this for the bottom hole.
The 1.75” Cable pass-through can comfortably fit multiple wires and cables at one time, boasting the ability to manage four large, braided HDMI cables plus additional thinner cables for an array of options. The top and bottom modules can be placed up to five feet apart and the bracket wings hold everything securely in place.

Hooking Them Along the Back of Furniture

Included with the D-Line Cable Raceway is a 1.18” w x 0.59” h x 39” l half-round cord cover and double-sided adhesive.

Hiding In Drawers

If you’re an avid DIYer, you may want to consider building a cable management box to hide your TV and other cables wires in. The box really can be any shape you want, but if you’re looking for discreet, it’s probably best to opt for a simple rectangular or cube shape. Be sure to leave enough room inside to hide your wires and possibly a surge protector power bar, and to leave slats on one side so that you can run cables in various directions. You’ll also want a lid so that everything stays hidden and away from children and pets.

Stashing Behind Books

Cons
A happy by-product of organization is aesthetics. Now I’m an organization freak and to me, when something is organized it is also tidy, but I have friends who care more about the look and don’t care if the cords are a jumbled mess as long as you can’t see them. Hence, aesthetics is the second reason why you might want to hide those cables and cords from view.

Building a Wooden Box Painted the Same Color as Your Walls

Panel board

Ok, maybe you’re asking, “what’s the big deal?” or “Why even bother hiding your TV wires? It’s just extra work that you don’t need to do.” Well, strictly speaking, you’re right. There is no law saying that you have to hide your TV wires, or any other electrical wires for that matter. But there are three really compelling reasons for why you might want to.

Hide Them in Plain Sight

Included with this kit is a dual power outlet with pre-wired six-feet in-wall PowerConnector cable, a power inlet with pre-wired one-foot in-wall Power Connector cable, Six-foot power-supply cord, an installation template, and instructions.

Running Them All Behind Your Walls

Your home entertainment area is a place for you to unwind, relax, and maybe even entertain, but it’s hard to enjoy any of those things when all you can see is a mess of cables and cords everywhere. But how do you hide TV wires?

The Final Verdict on Hiding Your TV Wires

A deeply recessed wall mount plate lets the TV plug sit inset of the wall, allowing for low-profile mounting of your TV. Both the inlet and outlet cover come with brush style cable pass-throughs allowing you to hide your other AV and HDMI cables along with the TV power and the exclusive power indicator light lets you know power is getting to the outlet and the TV.
The A+ Electric Cord Management Kit is designed to hide the mess and disorganization caused by wires and cables in any room in your home, creating a clean and organized environment that is also safe for children and pets.