How to Make a Headboard – A Step-by-Step DIY Tutorial

Fold the corner fabric into a small pleat, making sure there are no bunching areas on either side, then staple to secure it.

Step 13: Trim all excess fabric, then mount the completed headboard to the wall.

A bed hardly seems complete without a headboard. Large or small, simple or ornate, the headboard can really set the tone for the entire bedroom. If you’re ready for a change in headboard, or if you’ve lived without one altogether for far too long, this is a pretty straightforward DIY project that you can have done in an afternoon.
Lay your high density foam carefully on top of the large plywood piece and angle the edges of the foam all the way around the perimeter. Don’t worry about being exact. This will help with the lay of the upholstery at the end.

Step 14: Stage the bed to make your headboard shine.

On the other hand, if you’re a fan of super simple or minimalist design, you may not want any upholstery at all on your headboard. Sometimes it’s nice to keep things basic and in this case the design shows the natural beauty of the wood and its unique pattern. It’s a very simple and easy headboard design, something that you can pull of in a weekend. You can make this out just a sheet of plywood and a few 2×4 wood pieces which you can easily find at any hardware store. Check out Anika’s DIY Life for more details.
Repeat for the other 3/4” strip and 5/8” board so you end up with two L-shaped brackets.
Your headboard will mount on the wall almost like a puzzle, with one L-shaped “bracket” (attached to the back of the headboard) fitting into another L-shaped “bracket” (mounted on the wall). So you’ll begin everything by creating these brackets. Screw one thin strip of 3/4″ plywood onto the edge of one 5/8” board. Make sure your screws don’t penetrate the bottom of the 5/8” board.

More DIY Project Ideas To Take in Consideration

DIY Wooden Headboard With Built-in Lights

This, in my opinion, is the fun part. Where it all starts to come together. I was almost too short on fabric, but I ended up having just enough to wrap around. Start by stapling 6”-8” apart from center, then pull the fabric taut and fill in that section with staples before moving on to the next 6”-8” section, always heading toward the corner. Staple right up to the corner but don’t do the corners until all the sides are completely secure. Make sure you’re pulling the fabric taut before every staple.

DIY HEADBOARD TUTORIAL – How to make velvet headboard

How to Make Your Own Tufted Headboard

Everybody likes the soft touch of velvet and the cozy feel that it can add to a space like the bedroom. With that in mind, making a velvet-upholstered headboard can end being a really cool idea. You can of course choose any color you want for the fabric so pick something that makes your bedroom feel welcoming and soothing. It could also be cool to match the color of the headboard to the bed’s frame. In any case, making a padded headboard like this one is actually easier than you think and this tutorial shared by the Fashion Attack channel can give you some guidelines and useful tips to help along the way.
When upholstering anything, always work from the middle outward toward the corners.

Another DIY Tufted Headboard

To keep things precise and simple, I loosely but carefully screwed two stabilizing screws from the free bracket down into the large plywood to hold the bracket in place. Flip the large plywood over, then screw from the large plywood into the bracket. I used four or five screws to hold it in place. This helps to make sure that no screw points will accidentally poke through the headboard. Then remove your two original holding screws, if necessary.
See how they’ll fit together on the wall? (Except, on the wall, they’ll be upright, rotated 90 degrees.)

Upholstered Headboard Tutorial

EASY DIY Plywood Headboard

This tutorial shared by ALO Upholstery will also show you how to make a channel-upholstered headboard from scratch and this time you get to see how it looks like when done sing leather instead of fabric. The process is basically the same and this tutorial will guide you through all the steps and explain the entire building process from start to finish.

Cheap 25$ DIY headboard

The best part about how to make a headboard is the fact that you can customize it to fit your space and your style perfectly. Let’s do it.

DIY Geometric Headboard

Easy DIY Decorative Headboard

Related: 101 Headboard Ideas That Will Rock Your Bedroom

DIY Wall Hanging Headboard

How to make a headboard Level project: Beginner to Intermediate.

DIY Headboard From Reclaimed Door

Introduction: Queen Bed Wood Headboard

The key to professional upholstered corners is keeping the bunching and pleating to a minimum, if not making them nonexistent wherever possible. You’ll want to staple all the way to the corner, then pinch the corner fabric into a line.
For a more traditional or classic look, a wooden headboard such as this one could be a nice option. This right here is a queen-bed headboard made out of some boards and 4’x4’ posts. It’s been stained and it has a really nice finish which highlights the natural beauty of the wood with all the knots and everything. You can head over to instructables to find out exactly how this was made and to see a list of all the materials and supplies that were used.