Connect with us


Should You Install Vinyl Floor Over Tile?

Vinyl floor over tile is one way to redo old floors. Questiosn may arise whenever you redo a floor. Do you want to take up your old floor or lay down the flooring on top of it? Do you want tile floors? Hardwood? Or perhaps vinyl?  Vinyl floor is a great option because it is…
The post Should You Install Vinyl Floor Over Tile? appeared first on Homedit.




But when it comes to vinyl flooring, there are multiple different types. Though the materials are the same, the method for installing the vinyl floor is different. Here are the primary types of vinyl flooring. 
Vinyl planks are boards that usually have a tongue-in-groove installation. They are installed like laminate, with one board attaching to the next board and securing together. There isn’t usually an adhesive with this type.
If you decide to remove the tile instead, then you can still follow most of these steps with very few changes. This will let you know the easiest way to install plank, and sometimes tile, vinyl floor over a subfloor. 
If what you want to do is leave the tile and install vinyl over it, then don’t be afraid. This is usually the safest option anyway and takes a fraction of the time. So if your tile is in good enough condition, go for it!

Why Install Vinyl Floor Over Tile?

If you are lucky, it will call come up in one piece. If not, it may take you a while to remove the tile. But this isn’t the worst part of remove tile. The tile will come up eventually and usually without too much trouble. 
Before you get started, you need to check for damaged tile. If there are any damaged pieces, they need to be repaired or removed. Otherwise, the floor will be uneven and can even break. It also won’t be waterproof. 

What Is Vinyl Floor?

Now if you decide to leave your tile then you just need to know how to install vinyl floors over the tile. This is just like installing vinyl floors over any subfloor. There are simply a few extra steps along the way. 
Today, our focus is going to be on how to lay vinyl floor over tile. The process is quite simple and you don’t need a lot of experience to learn how to do it. Let’s go over the steps, but first, let’s find out what vinyl floor is. 

Vinyl Plank

Vinyl flooring is a type of flooring that is made out of a plastic known as vinyl, which has man purposes. It is similar to linoleum but linoleum is made with natural materials while vinyl is made with man-made materials. 

Vinyl Tile

Using a power tool or a hammer and flat bar, start removing the tile. This party will take away the majority of the mess. Without a power tool, you can try to lodge the flat bar beneath the tile and gently hammer. 

Rolled Vinyl

You can also hire someone to remove the tile for you but the price for something like this can be steep. It depends on your region and how difficult the job is. Try to get a quote before you have someone begin.

Should I Remove Old Tile Instead Of Intalling Vinyl Floor Over Tile?

There are two ways you can finish your floor. You can do one full row and continue doing full rows or you can do a stairstep pattern. For peel and stick, stairstep is better but for tongue and groove, one row at a time is better.
Laminate is thicker, but the installation process for any tongue and groove system is the same. So if you’ve done one then you’ve done them all! Hopefully, this gives you more confidence to install your vinyl over tile. 

How To Remove Tile Floors

Vinyl tiles usually peel and stick but there are other installation methods too. The tiles look like standard tiles and they use an adhesive to stick to the floor so that they don’t peel up. Many of them even have fake grout lines. 
After you remove the grout, sweep and vacuum up all that you can. Because getting everything out of the way will make it easier for the tile to come up. It is also less stressful to clean up as you go when you are cleaning. 
Even if your floor can fit planks without them being cut, you want to cut the planks to give a natural alternating pattern. So cut the first board in half on the second row and work from there. Do some quarter or third boards as well.

Step 1: Prepare

You can remove tile in one day but not without struggling. The cost to remove tile can also add up if you decide to hire someone to remove the tile. That’s why you may want to install vinyl floor over tile. 
Now, this is the worst part of removing tile. Mortar can be very stubborn and can take days to remove. If it doesn’t all come up immediately, then that’s not a good sign. But here is the basic method to try.

Step 2: Remove Grout

If the vinyl that you install is installed in planks, then installing laminate is very similar. Especially if the vinyl is a tongue and groove instead of peel and stick plank vinyl. So in short, it can be exactly the same.
Using a hammer and a chisel, tap away at the mortar. It is a slow process, but you can usually peel it up in the usual way. After you get down to the thin mortar at the bottom, you may need to sand it away. 

Step 3: Clean Up 

You can use a ball peen or masonry hammer and chisel to begin removing grout. You can also use a grout saw. Whatever method you use, you should go at the grout line carefully. You just want to remove the grout at this point.

Step 4: Peel Up Tile

After the floor is clean, you can start laying planks. Start with one plank in the corner. It can be a good idea to lay your pattern out before you really get going so you will know if you have the right amount of boards. 
Don’t panic if you break the tile. The only reason you are preserving it at this point is so that it is easier to peel up afterward. It is easier to remove full tiles as opposed to broken tiles that stick to the floor. 

Step 5: Remove Mortar

vinyl floor over tile
It’s a good idea to remove the baseboards before you start laying any floor. If you don’t then there may be a gap. You also won’t be able to change the floor out again and the baseboards will look shorter than they are supposed to look. 

Step 6: Clean Up

Rolled vinyl doesn’t usually use the same installation methods as others. It usually is simply rolled down and can be stapled, glued, or left alone. It installs very similarly to underlayment or carpet because it is rolled.
How To Remove Tile Floors

How To Install Vinyl Floor Over Tile

Tile can be difficult to remove. That is the main reason to install vinyl floor over tile. Vinyl is easy to install and easy to remove. Even if you change your mind, you can remove vinyl in one afternoon.
Vinyl floor over tile is one way to redo old floors. Questiosn may arise whenever you redo a floor. Do you want to take up your old floor or lay down the flooring on top of it? Do you want tile floors? Hardwood? Or perhaps vinyl? 
In general, it is easier to leave the tile floor and lay over it. But if the tile is damaged beyond repair or if the floor is very uneven, then removing it may be necessary. It all depends on your tile and how much work you’re willing to go through. 

Step 1: Check For Damaged Tile

Clean up after the mortar dries. Sweep everything really good because it is important that the floor is very clean. If the floor isn’t clean then the new floor may be wobbly and a dirty subfloor can damage the planks.

Step 2: Remove Baseboards 

There could also be asbestos under the tile. Most people don’t think about asbestos under tile but it can happen. So if you are removing your tile keep this in mind and dispose of materials as soon as possible. 

Step 3: Apply Patch To Grout Lines

How To Install Vinyl Floor Over Tile

Step 4: Clean

Now here we have a really good question. If you already have tile floors, should you remove them or leave them when it is time to lay vinyl? Both are viable options and both have their own benefits.

Step 5: Start Laying Vinyl Floor Over Tile

The post Should You Install Vinyl Floor Over Tile? appeared first on Homedit.

Step 6: Cut Planks

Is Installing Laminate Over Tile Different

Step 7: Finish Floor

If you decide to remove your old tile, which is a big step, you need to know how to do so properly. Removing tiles is neither fun nor quick but you can get it done in one day if you put the work into it. 

Is Installing Laminate Over Tile Different That Vinyl Floor Over Tile?

Even if the tiles look pretty smooth and flat, you probably want to apply a patch to the grout lines. This will keep the tile even and give a flatter surface to work with. Fill every line with the mud that is made for this purpose. 
Vinyl floor is a great option because it is one of the cheapest flooring options available. It comes in many different types and can mimic almost any other natural flooring that you can imagine. So don’t let anyone downplay it. 
Prepare by gathering the right equipment and tools. Sweeping up real quick can also help you start the process. But most important, wear a mask and goggles if you have them. Ceramic tile especially can be dangerous. 
The last step simply involves cleaning up. Sweep the area well and then mop. after you get everything clean, you can make any repairs that need to be done to the subfloor and then lay your new flooring over it. 

Continue Reading is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to or .ca,, etc.