Connect with us


What Is Recessed Lighting And Do I Want It?

There are many different types of lighting that you can use in your home. You can hang mason jars or you can string fairy lights, or perhaps both! But one of the more popular types of lighting is recessed lighting. The reason it is popular is that it can be used with any design style,…
The post What Is Recessed Lighting And Do I Want It? appeared first on Homedit.




The post What Is Recessed Lighting And Do I Want It? appeared first on Homedit.
As far as looks go, both LED and incandescent lights look very similar, but it’s the energy efficiency as well as the safety of LED lights that ensure they come out on top. Learn more about the difference here. 
After you find a source, then you can cut a few holes in the ceiling where you will feed the wires to the light. Do this very carefully so you won’t have to do a lot of mudding to fix your mistakes when you’ve finished.

What Is Recessed Lighting? 

There are many reasons to choose recessed light which we will get onto later. Right now, all you need to know is that in general, recessed lighting is just like any other lighting but it is recessed into the ceiling. 
In general, you want each recessed light to cover around five square feet of space. You can also space them four feet from the wall and then ensure that there aren’t more than four feet between each light. 

LED Recessed Lighting Vs Incandescent Recessed Lighting 

This part varies but you usually feed the wires through the hole in the can and then attach them correctly. Next comes the trim which fits onto the can and then you’re ready to install a lightbulb!
If you’ve ever installed a light before then chances are, installing recessed lighting will be a walk in the park for you. These are the basic steps you need to take to install recessed lighting in your home.
Run your NM-B cable from the power source to a switch box and then to the first hole, allowing a couple feet of extra cable so you won’t be short. Then, run the cable from the first hole to the second hole, and so on. 

How Many Recessed Lights Do I Need?

How To Choose Recessed Lighting
How Many Recessed Lights Do I Need?
Before you buy any lights, always mark where you want to place them. With recessed lights, you’ll add a few more spots so make sure you plan this out carefully as you don’t want to overbuy or underbuy. 
Why Choose Recessed Lighting

Best Recessed Lighting Options

There is daylight, soft light, warm light, neutral light, and clear light. There are also more than five color options to choose from, making this great for those who want a very specific type of lighting in their home. 

Amico Recessed Lights

Most recessed lights are round and bland, which is what most people want. But some people highly prefer square lights to round ones. This is what you’ll see here, square lights with a pleasing aesthetic. 
Recessed lighting is a type of lighting that uses minimal space. It is placed into a hole in the ceiling and ends up flush with the ceiling itself. This saves a lot of space and passes the focus on to the rest of the room.

Ensenior Ultra Thin Lights

The reason it is popular is that it can be used with any design style, any era, and in any home. Today, we’re going to learn all we can about recessed lighting and the best recessed lights you can buy online.
The height of the room matters a lot because recessed lighting doesn’t light as far down as other lights. So you will need to add more if your room is taller than nine feet and you may need to add accompanying lights. 

Lithonia Lighting

You can use a serrated construction knife or a drill with a hole cutting attachment. There are other ways to do this but these will be your two easiest and smoothest ways that won’t require touchups afterward. 
You actually don’t need a can with these lights you just cut the hole, connect the wire nuts, and then connect it to the hardwire box. The attachment of the box is super easy so this is another reason to buy it.

Gimbal Spotlight Recessed Lights

What Is Recessed Lighting
This part is the easiest and doesn’t take much time, you simply clamp the can’s box into the hole and push until it fits into the ceiling appropriately. The clamps should click and that’s when you know that you’ve done it right.

Luxrite Square Lights

When placing recessed lights, you can pretty much use the same amount of lights as you would with certain other types of lights. Even though recessed lighting does light differently than other types of light.
These Gimbal lights are fully adjustable so you can control where your lighting rests. Get a full set and you can have any lighting mood that you want. You can buy a 2-pack, 6-pack, 8-pack, or 12-pack. 

How To Choose Recessed Lighting

This is the hole the recessed light will go into. It’s much better if you already have the light on hand as there is usually a guide that will help you cut the correct size. This stencil of sorts can be screwed into, or stuck onto, the ceiling. 
LED can lights are much more popular than their counterpart incandescent recessed lights. This is simply because LED lights are a newer type of lighting with quite a few more benefits than incandescent lighting.

Plan The Placement

It should also be mentioned that your power should 100% be shut off to this area of the house before you begin this. In fact, it’s safer to shut it off before you begin cutting holes so you won’t hit a hot wire.

Choose Your Size

Here is another safe choice with the most important options available. You get to choose the type of lighting it is, choosing between illumination, brightness, and the color temperature of the light in question.

Room Measurements 

These Amico lights come in either 4-inch or 6-inch sets, each with 12 in a pack. This is one of the safest choices as they are very versatile and fit any design. This is exactly what you’d expect a recessed light to be.

Lighting Design

This lighting by Lithonia Lighting is a real winner. If you want a specific amount of lights then you can buy one only whereas most recessed lighting makes you buy at least a twelve-pack even if you only need a few. 

Bulb Type

Get to your breaker box and rub the cables to the junction and clamp them down. Strip a few inches off of the cables and then connect like-colored wires using wire connectors. The black and whites always match.

How To Install Recessed Lighting

LED Recessed Lighting Vs Incandescent Recessed Lighting 

Step 1: Find A Circuit

Finally, this is a good time to decide on a bulb type as some lights aren’t compatible with all bulb types. So if you want an E12 then ensure the light you get is compatible with most E12 bulbs or you may be making another trip to the store.
The size of light you choose matters. You can get tiny tea light sized recessed lights or those that are over one foot wide. The spacing will be greatly affected by the size so decide this before anything else.

Step 2: Cut The Hole

This can save a lot of money if you only need a few lights. But it’s still the adjustable nature of these lights that makes them so popular. Imagine controlling your lights to this extend! You don’t have to imagine anymore. 
Recessed lighting is set into the ceiling so it won’t illuminate in a 360-manner as other lights do. So you may have to space them closer together if you aren’t using any other lights to accompany them.

Step 3: Rough-In The Wiring

This one is also very special because it is black. Since black recessed lighting is so rare, this is an awesome find. While most people do want white lights, black is always a viable option for those wanting something contrasting. 
There are many different types of lighting that you can use in your home. You can hang mason jars or you can string fairy lights, or perhaps both! But one of the more popular types of lighting is recessed lighting.

Step 4: Start The Wiring

There are many reasons why you’d want to choose recessed lighting. Sure, it may not light as large of an area as hanging lights but that’s a small price to pay for all of these benefits that come with recessed lighting. 
They are quite a bit more expensive than the round lights but this is worth it to most people. They also come in a sixteen back with five different color temperatures built-in so you can choose a different one each day.

Step 5: Install The Light 

If you want to choose your own lighting but need a list of things to look out for, we’ve got you covered there. This is the generic checklist you’ll want to take a look at if you are planning on installing recessed lighting. 
Unless you want to rewire the entire room, which would require you to take down the ceilings and some of the walls, you need to find a circuit to provide power. You need to find where the power will come from.
However, ground wires may be green or copper, so you can match green to copper and vice versa. But the other two must match. So if there is any confusion, call an electrician to help you finish up the wiring. 

Why Choose Recessed Lighting? 

The trim design is also important because it is 90% of what affects the style of light. So find a minimal trim design or a more intricate one, depending on how much focus you want to be put on these lights.

  • Great for small spaces
  • Energy-efficient
  • Flexibility 
  • Minimal ceiling damage

If you want to take the guesswork out of choosing recessed lighting then you probably want certain recommendations. We’ve found some of the best recessed lighting options you can buy online and shared them with you right here. 

Continue Reading is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to or .ca,, etc.