Connect with us

CURB APPEAL IN WINTER

What Kind of Sprinkler Head Do You Need for Your Backyard?

Choosing the right sprinkler head for your yard is really important and some people actually undermine that importance thinking that they’re “just sprinklers”, so why does it matter? Well, opting for wrong sprinklers can lead to a number of frustrations: plants are being watered too much/not enough, the sprinkler doesn’t have the right coverage, it…
The post What Kind of Sprinkler Head Do You Need for Your Backyard? appeared first on Homedit.

Avatar

Published

on

Depending on the water pressure in your home, your sprinklers will distribute more or less water in a given amount of time. Most sprinkler systems are designed to work at a water pressure of 30 PSI.
Amazon is usually the best place to buy sprinkler heads, or at least the best place to start looking because they offer a wide range of products from different brands and available at really good prices.
The weighted base is there to add stability to the product and prevent tip-overs. The spray head has a 360-degree rotation for more coverage and can spray away to areas that are 32.8 feet away. The head is made from ABS plastic and promises to prove long-term durability.
 

How to Adjust Rain Bird Sprinkler Heads

 
Hunter sprinkler heads are available in different types and specific models, so there aren’t any universally-applicable rules that we can tell you to teach you how to adjust every Hunter sprinkler head. If you’re looking to make adjustment on a Hunter pop-up sprinkler head, you have to:

  • You can usually change the watering direction and the distance by setting the fixed the left edge on the sprinkler head. The center cap that’s positioned on the rotor case needs to be moved all the way to the right, and then all the way to the left. If you rotate the entire rotor case, you will line up the left edge in the correct position.
  • If you’re looking to adjust the watering direction, you need to grab the spray head with two of your fingers and rotate to aim it wherever you want it to spray.
  • It usually takes a flat blade screwdriver to adjust the spray distance. Use the screwdriver on the center screw, the one located right on the head of the sprinkler. Turning the screw clockwise will cause the spray distance to decrease with 25 percent.

How Many Sprinkler Heads to Place Per Zone

When it comes to rotor sprinkler heads, few can beat the amazing quality of Rain Bird’s items. Designed to be useful for those looking to water medium and large-size shrub areas, these rotor sprinkler heads have a spraying length of 25 to 50 feet, and promise to deliver a uniform spraying pattern so there will be no dry or over watered spots.
 
Hunter PGP-adj Rotor Sprinkler Heads

Next up, we wanted to show you this pack of four-rotor sprinkler heads made from black plastic. This basically a good buy for people who are attracted to the idea of bulk purchases, offering a good price per each sprinkler head.

Well, opting for wrong sprinklers can lead to a number of frustrations: plants are being watered too much/not enough, the sprinkler doesn’t have the right coverage, it doesn’t offer enough spraying patterns, there’s no way to adjust the distance and pattern, and so on.
It is ideal for small to medium-sized lawns, and the head can provide you with 6 different spray patterns to choose from. The turbo motor promises to ensure a longer lifespan.

How to Adjust Hunter Sprinkler Heads

 
Orbit 55032 1/2" BRS Sprinkler Head

  • Make sure you’ve selected the right nozzle that offers head-to-head coverage. Hunter rotor sprinkler heads usually come with a variety of different nozzles, with each of them having opening sizes that determine the radius control. That means that a nozzle with a larger opening will be able to throw the water at a farther distance if there is enough water pressure.
  • The nozzle is installed by pressing it on the opening so that it flushes with the rotor body. The metal end of the rotor key needs to be placed into the rubber’s cap arrow to make sure the nozzle is secured in place. Make sure that you turn the set screw clockwise.
  • Manually turning the rotor will reveal the fact that you can only turn it in one direction until it reaches the limit, and then to another direction to the same effect. You will notice there is an arrow that indicates the spray’s direction.
  • You will find there is a collar that locks the rotor body into the housing. You will have to turn it counterclockwise to free it. Proceed by lifting the rotor body until you notice that the bottom gear clears the two housing ridges.
  • Point the spray arrow into the direction of your choices, then lower the body again and lock it in place.
  • The rotor body now needs to be turned counterclockwise with your hand up until its left limit. Look at your desired left edge and compare it with the direction of the spray arrow. You can move the body about halfway its travel, then proceed to inserting the plastic end of the rotor key into the cap’s hole (you will notice that it has a couple of arrows pointing to + and – signs). If you turn the key to the + sign, you will notice the left travel limit moves away from the right one, increasing the coverage.

How to Replace Sprinkler Heads

Today, we’re going to talk about the best sprinkler heads on the market, but not before we talk a little bit about the adjustment options of the two major players on the market.

  • Before you start digging, make sure that you have a compatible sprinkler head replacement.
  • Grab a trowel and dig the ground around the damaged sprinkler head. Be really careful how to dig because you won’t want to damage the water line in any way. Save the soil that you’re digging out for later, so you may put it back whenever you install the new sprinkler head.
  • Now you have to unscrew the damaged sprinkler head which is located on a pipe called a riser. The riser is what connects the sprinkler head to the water pipes so, when you’re removing the head, you’re going to have to twist it counterclockwise and make sure that you detach it from the riser, should the two parts come off at the same time.
  • Place the new sprinkler head in the place of the old one, and make sure that the riser is attached properly (by using seal tape wrapped around the threads). Before you put in the sprinkler, turn on the water to make sure there isn’t any dirt in the pipe. When the pipe is dirt-free, you can proceed to tightening the new sprinkler.

The Best Sprinkler Head Reviews

Melnor Pulsating Sprinkler with QuickConnect Product Adapter

Capable of covering areas of up to 70 feet in diameter, the Melnor 65065-AMZ sprinkler head is a regular beast amongst its peers. It features some of the specifications that you usually see in other Melnor sprinkler heads, including the quick connect feature that requires the adapter which is sold separately.
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Melnor 95548-IN Multi-Adjustable Garden Above Ground Sprinkler System Kit
Each of these three heads promises to cover an area of up 800 square feet. The heads allow you to adjust the spraying angle to cover the areas that you need them to.
 

FAQ

Which is better: Rainbird or Hunter?

Hunter sprinkle head

Can I mix and match my sprinkler heads?

The sprinkler promises to cover areas of up to 85 feet in diameter, and it’s available in multiple versions, including one with a metal head and a wheels base. The sprinkler is designed for easy connect/disconnect thanks to the designated adapter that’s available as a separate purchase.
You also have to know the required flow rate of the sprinklers. To figure this out, you have to divide the GPM to the actual amount of water that a sprinkler uses per minute (which is also measured in gallons). Then, adjust the number of sprinklers you have to place per zone accordingly.
The technology behind the watering system is focused on large droplets that can’t easily be carried away by the wind. Thanks to the self-cleaning arc adjustment screw, maintenance of these rotor heads should be easier than ever.

Bottom Line

Choosing the right sprinkler head for your yard is really important and some people actually undermine that importance thinking that they’re “just sprinklers”, so why does it matter?
The seal is designed to respond to pressure and integrates a system that allows you to connect multiple heads to the same valve. We also have to talk about the precision controlled flush at pop-down which helps remove the debris from the sprinkler head.

Continue Reading

YardWorship.com is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a way for websites to earn advertising revenues by advertising and linking to Amazon.com or .ca, .co.uk, etc.